Contact Us at:

866-674-8990 Toll Free

303-257-8056 Cell

E-mail: eric@frontrangerestoration.com

Web: www.FrontRangeRestoration.com

 

 Home | Restoration Services | 24/7 Water Damage |  Common Water Damage Questions | Construction & Repair | Hardwood Floor Restoration |

Structural Drying | Some of the Tools We Use for the Initial Inspection | Some of the Drying Equipment We Use | Water Damage Guide | Categories of Water  | $250 OFF Water Damage  | Mold & Mildew | Moisture, Mold & Mildew  | Mold & Insurance | More About Mold  | Speed Drying |

Thermal Energy Drying | Heat Drying; an Old Concept  | Carpet Cleaning | Carpet Stretching | Videos of Water Damage |

Contact Us | Ask Us A Question | Customer Appreciation | Terms of Use/Disclaimer |

Emergency Restoration Network | Links To Other Services | List of Services, FRR

Please Let Us Know if There Are Any Broken Links

DRI HEAT Drying Systems

A Proud Member of the Emergency Restoration Network

Division of Color Tech Restoration, LLC
Heat Drying Virtually Eliminates the Growth of All Molds and Bacteria's. Almost All Restoration Company's Use Dehumidification, Air Movers for Drying and Chemicals to Retard the Growth of Molds and Bacteria's. These Drying Techniques Have Been the Standard for Years. Heat Drying Is a Non Chemical System which Will Virtually Eliminate the Growth of All Molds and Bactria’s by Up to 99%. Most Molds and Bacteria’s Just Can’t Grow Above 90 Degrees

Videos and Pictures of Some of the Systems We Use for the Initial Inspection and Drying Systems We Use.

Checking Moisture In Wood Floor with Hammer Probe and SurveyMaster

Video inside a wall cavity. This system helps use find problem areas such as mold, wet materials and at the same time reduces the need for tearing out walls and ceilings compared to not using our camera.

Under Sink and Dishwasher

Containment and Drying Equipment, Eliminator, Air Movers, Air Scrubber, Power Splitter, Downdraft Fan

ELE 6400 Is Putting Heated Air Into the Squall Fan Side of the Air Mover. The Air Mover is Pushing the Heated Air Into the Ceiling Cavity. The Thermostat Probe Is Put Into the Ceiling Cavity. This Gives the Actual Temperature Inside the Ceiling Cavity.

This video is after two days after we started drying. We pulled 2 layers of vinyl flooring and 1/4” layer of subfloor.  The floor was black when we started. We treated the floor and heat dried the flooring, kitchen cabinets and drywall. As you can see in the video after two days the floors are much more white and dry.

Photo Gallery      Christmas Eve Flood 2009      Return To Heat Drying
Thermal Energy Drying Virtually Eliminates the Growth of All Molds and Bacteria's. Almost All Restoration Company's Use Dehumidification, Air Movers for Drying and Chemicals to Retard the Growth of Molds and Bacteria's. These Drying Techniques Have Been the Standard for Years. Heat Drying Is a Non Chemical System which Will Virtually Eliminate the Growth of All Molds and Bactria’s by Up to 99%. Most Molds and Bacteria’s Just Can’t Grow Above 90 Degrees

Resent in Arvada Dryout using the ELE 6400, Eliminator and VapairVent System Pipe broke in bathroom upstairs. Water went down all 3 floors. The upstairs had very little damage. The middle floor had wet walls, contents and floorings. The basement got hit the worst as you can see.

Pipe Froze and Flooded Lower Area. We Subsurface Extracted the Carpet, Blocked the Furniture and Dried Floorings, Contents In Place. We Used the Eliminator Using 4 Circuits and the VapairVent. Everything Was Dry In 2 Days. Drywall and Insulation Were Also Dry In 2 Days.